InVision Access Equipment Rack 8RU

Description:
The InVision Access equipment rack provides 8RU of secure rack storage wherever it may be needed. Glides and casters are included for stationary or mobile use. Available in the same color combinations as the InVision Access Table V2.
Item Numbers: 37123
  • Provides 8RU rack capacity
  • Equipment rack can be integrated off-site, then wheeled into place
  • Single cam locking front and rear panels
  • Ventilated panels keep equipment cool, preventing overheating, and extending device life
  • Access panels (one clear acrylic, one solid) provide monitoring and access to internal equipment
  • Glides and casters included for stationary or mobile use (glides can be unscrewed to raise unit off casters for stationary use)
  • Worksurface vinyl edging protects walls and furniture
  • Ships fully-assembled for quick, simple integration and deployment
  • Durable powder coated steel chassis provides a long-lasting finish
  • Scratch and impact-resistant high-pressure laminate worksurface
  • Grommet holes in worksurface and base panel provide cord access
  • Includes 2 wire looms to route wires to / from table
  • SCS Indoor Advantage Certified; meets or exceeds applicable ANSI-BIFMA test standards
  • Warranted to be free of all defects in materials and workmanship for 10 years
  • Assembled in Chippewa Falls, WI, USA

    • The worksurface is constructed from 1.063” NAUF (No Added Urea Formaldehyde) composite board with .030” high-pressure laminate on one face, and a balancing phenolic backer on the opposing face
    • 16-gauge side panels, and front door
    • All metal components are finished with a scratch-resistant powder coat epoxy
    • Worksurface edges are covered with 3mm vinyl (color matching)
    • Factory assembled. (Wire looms installed by customer)
    • Rack rail 8RU
    • Wire looms .75” [1.9 cm] dia x 64” [162.6 cm] length (includes 2)
    • Unit weight (nominal) 64 lb [29.1 kg]
    • Shipping weight (nominal) 90 lb [40.9 kg]

      Request A Quote

      Simply complete each step below to generate your perfect product!

      Note: Color samples are approximate. All edge band will match your chosen laminate or as shown, unless you specify differently. Not all metal finishes are available for quick ship laminates. For more details about laminates and edge bands available and to request samples, contact us today.

      1Expressions Laminate

      Choose Your Laminate

      Note: Color samples are approximate. All edge band will match your chosen laminate or as shown, unless you specify differently. Not all metal finishes are available for quick ship laminates. For more details about laminates and edge bands available and to request samples, contact us today.

      NEXT STEP
      2Metal Finish

      Choose Your Metal Finish

      Note: Color samples are approximate. All edge band will match your chosen laminate or as shown, unless you specify differently. Not all metal finishes are available for quick ship laminates. For more details about laminates and edge bands available and to request samples, contact us today.

      back FINISH & CHOOSE QUANTITY